VS1-40.5E indoor high voltage vacuum circuit breaker
VS1 -40.5 indoor high-voltage vacuum circuit breaker is suitable for indoor switchgear with three-phase AC 50Hz rated voltage of 35kV power system, as the protection and control unit of power grid equipment and power equipment of industrial and mining enterprises. It is suitable for frequent operation under rated working current, or places where short-circuit current is interrupted many times.
Category:
Breaker
Hotline:
Description
Product Overview
VS1 -40.5 indoor high-voltage vacuum circuit breaker is suitable for indoor switchgear with three-phase AC 50Hz rated voltage of 35kV power system, as the protection and control unit of power grid equipment and power equipment of industrial and mining enterprises. It is suitable for frequent operation under rated working current, or places where short-circuit current is interrupted many times.
Conditions of Use
1. The upper limit of ambient air temperature does not exceed 40℃, and the lower limit does not exceed -15℃;
2. The wind speed is not more than 35m/s;
3. The altitude is not higher than 1000m;
4. The earthquake intensity should not exceed 8 degrees;
5. Ambient humidity: the monthly average relative humidity is not more than 90%; the daily average relative humidity is not more than 95%;
6. The installation site should be free from flammable, explosive, chemically corrosive substances and frequent violent vibrations;
7. Filth level: IV.
Product Standards
GB1984-2014 High Voltage AC Circuit Breaker
GB3309-1989 Mechanical test of high voltage switchgear at room temperature
JB/T3855-2008 High Voltage AC Vacuum Circuit Breaker
JB/T8738-2008 Vacuum interrupter for high voltage AC switchgear
GB/T 7354-2003 Partial discharge measurement
GB/T1 1022-2011 Common technical requirements for high-voltage switchgear and control equipment standards
GB/T16927.1-2011 High Voltage Test Technology: General Definition and Test Requirements
DL/T402-2016 Technical Conditions for Ordering AC High Voltage Circuit Breakers
DL/T403-2000 12kV-40.5kV High Voltage Vacuum Circuit Breaker Ordering Specifications
Key Features
1. Reliable modular spring operating mechanism: the spring operating mechanism is a spring operating mechanism arranged up and down, with manual energy storage and electric energy storage functions, the overall size of the whole machine is small, the overall rigidity of the circuit breaker is good, and the operating performance Consistently.
2. The electric circuit adopts a sleeve type structure: the vacuum interrupter of the primary electric circuit of the circuit breaker is arranged in a closed insulating cylinder. The insulating cylinder is made of epoxy resin material with reliable electromechanical properties and advanced APG technology. Forming, the insulating cylinder can not only install and support, but also play the role of phase-to-phase and relative-to-ground insulation.
3. Standard closing and opening function modules: Modular design spring mechanism is another feature of VS1 indoor vacuum circuit breaker. The spring operating mechanism includes two function modules of closing and opening, which are easy to maintain and replace. Fast, short maintenance time for power failure. In addition, since the closing and opening function modules used as spare parts have been lubricated and adjusted by special grease and have a long shelf life, there is no need to repair the entire circuit after the closing and opening modules are replaced. The operating mechanism of the circuit breaker can be readjusted without changing the dynamic characteristics of the circuit breaker, so that the maintenance and repair work is reduced to a minimum.
4. Good handcart interchangeability and adaptability, and the installation size can be used with ZN85, VD4 and other series products.
5. Strong breaking capacity and long service life.
Key words:
Related Products
Message