FTU feeder terminal
DAE-F series feeder terminal is an intelligent terminal device installed in the power distribution room or feeder. It can communicate with the remote power distribution station, send the operation data of the power distribution equipment to the power distribution station, and can also accept the control commands of the power distribution station to control and adjust the power distribution equipment,
Category:
Switchgear
Hotline:
Description
Product Overview
DAE-F series feeder terminal is an intelligent terminal device installed in the power distribution room or feeder. It can communicate with the remote power distribution station, send the operation data of the power distribution equipment to the power distribution station, and can also accept the control commands of the power distribution station to control and adjust the power distribution equipment, with remote control, remote signaling, and fault detection. It also communicates with the distribution automation master station to provide the operation status and various parameters of the distribution system, including switching status, power parameters, phase-to-phase faults, ground faults, and parameters at the time of failure, and executes the commands issued by the distribution master station. , adjust and control the power distribution equipment, and realize the functions of fault location, fault isolation and rapid power restoration in non-fault areas.
Key Features
1. With communication, it has "remote maintenance" function.
2. Flexible configuration, all protection functions have separate switching.
3. The device has a complete self-checking function, which can check the working conditions of each part online.
4. The closing circuit adopts an anti-misoperation design and has an anti-misoperation function.
5. By choosing different configurations, it can meet the "three remote" and "two remote" needs of the State Grid and South Grid.
6. Meet the special requirements of all parts of the country (such as Shandong, Beijing, Guangdong, etc.).
7. With zero-sequence current setting self-adaptive function, no manual setting is required.
8. Meet the specific requirements of "primary and secondary integration".
Key words：
Previous
Next
Previous
Next
Related Products
Message
Henan Sanhe Electric Group Co., Ltd.
Address：Building 39, International Enterprise Port, 25th Street, Hanghai East Road, Zhengzhou Economicand Technological Development Zone
Copyright © Henan Sanhe Electric Group Co., Ltd.
Supported IPV6
Copyright © Henan Sanhe Electric Group Co., Ltd.
Supported IPV6
